| ER-4 MicroPro Series
ER-4 MicroPro Earphones are high fidelity transducers developed
specifically to combine flat frequency response with isolation from
external noise. They deliver transparent, reference-quality sound and
provide at least 20-25dB of external noise exclusion at all frequencies,
which allows listeners to hear the full dynamic range of recorded or
live music at safe levels.
(See Non-Electronic Order Form to purchase
any of the following products).
All systems include the following:
 | 5 ft cord with 3.5mm stereo phone plug |
 | 1/4" stereo phone adapter plug |
 | 6 white flanged eartips |
 | 10 foam eartips |
 | Filter changing tool with 4 filters |
 | Instruction booklet |
 | Shirt clip |
 | Carrying pouch |
 | Storage box |

ER-4B MicroPro Earphones (Binaural)
The ER-4B is mainly used for KEMAR manikin and other binaural
recordings. These are excellent for materiel not equalized for
loudspeaker playback.
 | Unparallel sound accuracy |
 | Virtual elimination of external background noise |
 | Light-weight and portable (great for traveling) |
 | High-fidelity monitor earphones for REM |
 | Cost: $330.00/pair -
See Non-Electronic Order Form to purchase |

ER-4S Micropro Earphones (Stereo)
The ER-4S earphones are designed to give the most accurate response with
normal commercial recordings. Some users with low powered portable
equipment prefer to use an external headphone amplifier.
 | Unparalleled sound accuracy |
 | Virtual elimination of external background noise |
 | Designed with a gradual roll off in the high frequencies |
 | Has approximately 5dB less output at 10kHz the ER-4B |
 | Lightweight and portable (great for traveling) |
 | High-fidelity monitor earphones for REM |
 | Cost: $330.00/pair -
See Non-Electronic Order Form to purchase
|

ER-4P Micropro Earphones (Power)
The ER-4P is the newest model in the ER-4 family of MicroPro earphones.
This model has the following changes over the ER-4S unit.
 | Higher sensitivity for use with portable devices |
 | Provides 9dB more output with a 1mV input then the ER-4S |
 | Increased low frequency sensitivity relative to the ER-4S |
 | New cable design for reduced mechanical noise |
 | Higher sensitivity and lower impedance then the other ER-4 models
|
 | Cost: $330.00/pair -
See Non-Electronic Order Form to purchase |
|